Omron Sysmac CJ1W-OD211 PLC 16 Point Transistor Ouput Unit New

Description

Pulled from integrated but never used machinery. Sold as new old stock.
We have more of these units available if interested please message us.
Thanks for looking and feel free to contact us with any questions.
Check out the specs of the units here: ia.omron.com/products/family/2055/lineup.html?_ga=2.47926055.1465999981.1568665423-1418300712.1568665422
CJ1W-OD211 Transistor Output Unit (16 Points)
Name
16-point Transistor Output Unit with Terminal Block (Sinking Outputs)
Model
CJ1W-OD211
Rated Voltage
12 to 24 VDC
Operating Load Voltage Range
10.2 to 26.4 VDC
Maximum Load Current
0.5 A/point, 5.0 A/Unit
Maximum Inrush Current
4.0 A/point, 10 ms max.
Leakage Current
0.1 mA max.
Residual Voltage
1.5 V max.
ON Response Time
0.1 ms max.
OFF Response Time
0.8 ms max.
Insulation Resistance
20 MΩ between the external terminals and the GR terminal (100 VDC)
Dielectric Strength
1,000 VAC between the external terminals and the GR terminal for 1 minute at a
leakage current of 10 mA max.
Number of Circuits
16 (16 points/common, 1 circuit)
Internal Current Consumption
5 VDC 100 mA max.
Fuse
None
External Power Supply
10.2 to 26.4 VDC, 20 mA min.
Weight
110 g max.
Circuit Configuration
(See picture above)
The signal names of the terminals are the device variable names.
The device variable names are the names that use "Jxx" as the device name.
External connection and
terminal-device variable
diagram
(See picture above)
When wiring, pay careful attention to the polarity of the external power supply. The
load may operate incorrectly if the polarity is reversed.
The signal names of the terminals are the device variable names.
The device variable names are the names that use "Jxx" as the device name.